My check engine light is on after incorrectly trying to jump start a friend's car

Tiny
HAPPYGOJACKIE
  • MEMBER
  • 2010 MAZDA 3
  • 11,847 MILES
Jump started a friend's car tonight. The jumper cables were put on the wrong terminals on my battery and there was sparking as the connection was made. The cables remained connected incorrectly for over a minute. Cables were reversed and friend's car was jump started however afterwards my check engine light came on and has remained on for the last 45 minutes. Would appreciate any thoughts or advice as how to proceed.

Thanks!

2010 Mazda 3
Saturday, July 13th, 2013 AT 2:25 AM

1 Reply

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Check all fuses with a test light but most likely you have damaged computers on board. This is just the start of your problems. Never, never jump start anyones car.

Start with the codes? We need those numbers

Roy
Was this
answer
helpful?
Yes
No
-2
Saturday, July 13th, 2013 AT 3:34 AM

Please login or register to post a reply.

Sponsored links