Hey WHISPERS_HOPE,
It could be caused by a plugged heater core.
Have you checked the engine coolant level?
If the coolant level is good then you can use the method attached below to check if the heater core is plugged.
Let us now what you find here.
If you have even heat at both hoses of the heater core then you may have a problem with the blend door motor not moving the blend do to channel hot air.
I have attached the instructions for replacing the blend door motor below.
If you change the heater control from hot to cold can you hear/feel the blend door motor moving?
Regards, Joe
Images (Click to make bigger)
SPONSORED LINKS
Sunday, February 16th, 2020 AT 10:59 PM