1999 Mercedes Benz ML430 wrench light

1999 MERCEDES BENZ ML430
157,000 MILES • V8 • AWD • AUTOMATIC
Avatar
BUBBA5701
  • MEMBER
  • 3 POSTS
How do you clear or turn of the wrench light on my dash? It shows the wrench and 2400 after it.

updated 2/2/09
Performed application as instructed. Wrench light is still on and shows -2400 as before.
Jan 26, 2009 at 10:19 AM
Advertisement
Avatar
GFIMOTORCARS
  • ✓Experienced Mechanic
  • 673 POSTS
1. turn vehicle on (engine not running) and press the trip/odometer reset button 2x within 1 sec.
(current service status will be displayed)
2. Within 10 sec. turn key to off position
3.Press and hold the trip/odometer reset button
4. After approx 10 sec. of holding the reset button, the counter will reset and read 10,000 miles.
Jan 29, 2009 at 2:48 PM
Avatar
GFIMOTORCARS
  • ✓Experienced Mechanic
  • 673 POSTS
Please try the following to remedy the light:
1. Turn vehicle on (engine not running and all dash lights on). Again push the tripometer reset button twice. Press and hold down reset, keep this depressed for the remainder of this instruction.
2. Turn the vehicle off and then back on to the prior position within 10 sec.
(the service screen should not change during this process)
3. Continue holding the button until the service counter resets.
Feb 2, 2009 at 1:23 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle

Advertisement