low oil pump pressure

2006 FORD KA
260,000 MILES • 1.3L • 4 CYL • 2WD • MANUAL
Avatar
DIRK JORDAAN
  • MEMBER
  • 1 POST
I want to know if there is a way to help the oil pump pick up pressure after the whole engine has been reconditioned. I put the whole engine together but forgot to prime/oil up the oil pump so now the oil pump is running dry.
Mar 24, 2017 at 12:46 AM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
you can prime the pump by removing the oil filter and using an oil can pump oil down the filter supply hole, this should run down into the pump and help with prime, also fill the filter with oil before re-fitting, pull the spark plugs and crank the engine, this will give a faster crank speed to help lift the oil as well.
Mar 24, 2017 at 4:57 AM