1995 Lexus LS 400 replacment of digital controle unit for t

Do you mean the a/c heater control assembly?
Remove register from above radio, remove upper shift console panel,disconnect connectors necesary for removal.remove 4 screws. remove radio and heater control assembly together.Remove 2 screws to seperate the radio and controller, reverse procedure to install

hi jack.thanks for your answer to my query.my LS400 does not have apart between the air con panel and the radio.also the shift console is in one piece.i take it that when you say register you mean a narrow strip my vehicle has not got one sorry to be a pain .regards geoff

Without the car, all I can do is what my software says. The radio and controller mount to each other. The register is the vents.What is the exact production date fom inside the door sill on the sticker? Differnet year might have different instructions

hi jack .the date of first registration is 19-01-1995 .i hope this will help.thanks again.regards geoff

Is that 1 or 9 of 95?

hi jack first registered on 19th jan. 1995.any good? thanks .geoff

Need the production date.Open drivers door, should be a White sticker on the inner door frame or on the door where the latch is.

hi once again jack the date of manufacture is october 1994 hope that will do it thanks geoff

once again? the instructions in my software are the same for either years.

hi thanks for your patience in tryinng to sort my problem.i realise that you can only give a limited amount of info.so i am gratefull for the help that you have given .there is one more thing that i would appreciate can you tell me how to remove the heater vent as i can't see any screws.thanks again regards geoff

Most of the time things like that just pop in and out.The clips can be a little tight and take some effort

hi. ok i will try that .thanks again for your time ,you are doing a grand job for us inexperienced morons regards geoff

no one is a moron, just inexperienced