SPONSORED LINKS

2006 Lexus GS 300 Vehicle stability control system

Tiny
TAKADIVE
  • MEMBER
  • 2006 LEXUS GS 300
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 53,000 MILES
If the traction control system malfunctions and the slip indicator light and brake system warning light come on could it be a fuse? Does system have a fuse and were would it be? There are several fuse boxes on this vehicle. Could it have anything to do with brake replacement? 3 days ago the brake indicator came on, 2 days ago the vehicle stability control system warning came on. Yesterday I had the rear brakes replaced. The brake indicator went out but not the VCS warning, could there be a reset for the vehicle stability control indicator?
SPONSORED LINKS
Wednesday, February 10th, 2010 AT 4:03 PM

1 Reply

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
For all of them to light up is most likely a failure in the system, not likely to be a fuse. You should have the system scanned to see what codes the computer has stored. May be something as simple as a wheel sensor, but a scan will point us in the right direction. If the lights were on 2 days ago, then brakes were done yesterday, its not likely the cause of the problem
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, February 10th, 2010 AT 4:29 PM

Please login or register to post a reply.

Related Traction Control Fuse Content

Sponsored links