SPONSORED LINKS

2002 Kia Spectra sensors

Tiny
ALLANADER
  • MEMBER
  • 2002 KIA SPECTRA
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 266,745 MILES
I just had a check engine light come on it was a tps sensor and oxygen sensor the rear heated one. I erased the codes and they both pop up again and I changed the sensors again thinking it might be faulty sensors and put new ones again and erased the codes on the odb meter from auto zone and they pop up again. What is wrong or am I doing something wrong
SPONSORED LINKS
Tuesday, March 23rd, 2010 AT 9:30 AM

7 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi allanader,

Thank you for the donation.

What were the exact trouble codes?

If replacement of the parts did not help, you would need to test the wiring and the PCM.

Those should have been done before the parts replacement.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, March 23rd, 2010 AT 1:35 PM
Tiny
ALLANADER
  • MEMBER
  • 4 POSTS
The codes are p0036 and p0121. Those are the codes that keep poping up
Was this
answer
helpful?
Yes
No
Tuesday, March 23rd, 2010 AT 9:05 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
I have sent the diagnostics files to your email.

Let me know if it is helpful.
Was this
answer
helpful?
Yes
No
Wednesday, March 24th, 2010 AT 7:26 AM
Tiny
ALLANADER
  • MEMBER
  • 4 POSTS
Thank you very much I will try these out tomorrow and will tell you what I have found out thank you very mjuch
Was this
answer
helpful?
Yes
No
Wednesday, March 24th, 2010 AT 7:35 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
You're welcome. Let me know if you require any further information.

Have a nice day.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 24th, 2010 AT 7:43 AM
Tiny
ALLANADER
  • MEMBER
  • 4 POSTS
They told me that its the ecm that its not reading the codes and that it has to be erased and download. The program again to the ecm. Have you heard of this before?
Was this
answer
helpful?
Yes
No
+1
Thursday, April 1st, 2010 AT 10:42 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
No I have not heard of this. When the ECM cannot communicate with the scanner, there could be some problem with the wiring, fuses or the scanner used is not compatible. Get a second opinion.
Was this
answer
helpful?
Yes
No
Thursday, April 1st, 2010 AT 3:28 PM

Please login or register to post a reply.

Related Oxygen Sensor Replace/Remove Content

Oxygen Sensor Replacement
VIDEO
Oxygen Sensor Replacement
Instructional repair video
Oxygen Sensor Replacement
GUIDE
Oxygen Sensor Replacement
An oxygen or lambda sensor is used to determine the engine exhaust mixture which can then be controlled by the computer. These sensors are equipped with a heater that can...
VIEW MORE

Sponsored links