4-way flashers and turn signals

JEEP
Avatar
RMJ
  • MEMBER
  • 3 POSTS
Just recently my turn signals and 4-way flashers just stopped working.Then all of a suden they started working again.A few days went by and again they stopped.Another few days went by,and they started working.I went to see if this was a fuse problem.Come to find out it wasn't.The fuses were all ok,but the 4-ways and turn signals still acted crazy!What could this possibly be?PLEASE HELP!!!
Jun 26, 2007 at 10:24 PM
Advertisement
Avatar
MIKEMRRYMN
  • MEMBER
  • 7 POSTS
sounds like you may have a short somewhere or a bad ground on the lighting system, could be a loose plug or connector, check the fuse box to make sure the flasher modules are both secure and working properly, if there are two of them, check all plugs and connections near the fuse box to make sure they are all secure, could be just loose plug going in and out of connector when you hit a bump in the road or something without veh type its hard to say where the plugs are located
Jun 26, 2007 at 10:45 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.