1995 Jeep Laredo

Tiny
RICHARD URIAS
  • MEMBER
  • 1995 JEEP GRAND CHEROKEE LAREDO
Engine Mechanical problem
1995 Jeep Laredo 6 cyl Two Wheel Drive 178000 miles

Hello once again! How do I pull out an oil pump and install one, what steps do I take? On a 95 4.0 jeep cherokee laredo 2 wheel drive.
Wednesday, March 17th, 2010 AT 3:39 PM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
1.Remove oil pan as outlined under Oil Pan/Service and Repair.
2.Remove oil pump to cylinder block retaining bolts, then the oil pump and gasket. WARNING: Do not disturb positioning of oil pump strainer and tube. If tube is moved, a replacement tube and screen assembly must be installed to prevent pump cavitation.
3.Reverse procedure to install, noting the following:
a.Use a new oil pump gasket.
b.Tighten retaining bolts to specifications.

https://www.2carpros.com/kpages/auto_repair_manuals_alldata.htm
Was this
answer
helpful?
Yes
No
Wednesday, March 17th, 2010 AT 4:13 PM

Please login or register to post a reply.

Sponsored links