1998 Jeep Cherokee no start

1998 JEEP CHEROKEE
Avatar
FRAN
  • MEMBER
  • 3 POSTS
Computer problem
1998 Jeep Cherokee 6 cyl Four Wheel Drive Automatic

I have no spark, no fuel pump, my fuel gauge and amp gauge don't move when i turn the key on. Engine cranks fine, i have power to the fuel pump relay and the asd relay. i do have power to 3 posts on my relays. also when i hook my scanner to the Diagnostic connector it says no communication. all fuses are good. I'm thinking a broken wire some where Can you help?
Oct 19, 2008 at 6:06 PM
Advertisement
Avatar
JASONRAY
  • ✓ASE Certified Mechanic
  • 213 POSTS
  • ASE Certified Mechanic
The computer controls all of that. It 'grounds' the fuel pump relay to activate it. It also sends a reference voltage to the Crankshaft Position sensor which provides information needed for the fuel injection and ignition systems. Check ALL fuses first. If the PCM isn't powering up, it won't communicate with a scanner and it won't control all of what it's supposed to. There are sometimes more than 1 fuse for the PCM so don't overlook any. Under the dash AND under the hood. Try that. If still nothing, get back with me and we'll keep going.
Dec 17, 2019 at 7:09 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.