SPONSORED LINKS

1992 Jaguar XJ6 Replacement Blower motor issue

Tiny
JAULT01
  • MEMBER
  • 1992 JAGUAR XJ6
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 168,000 MILES
I recently replaced the right blower motor in my xj6. In order to do so, I had to "swap" the wiring harness from the old one to the replacement as the new one was a larger sized fitting. The wires were all the same color and rating.

The problem is this. After I installed the replacement motor and tried to run the heater the blower immediately blew a fuse. And continues to do so every time.

I don't know what to look for, PLEASE HELP!
SPONSORED LINKS
Thursday, February 5th, 2009 AT 1:20 AM

3 Replies

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Then it is wired wrong. If it blows the fuse you have a short to ground. It will then blow fuse A2 which is also the fuse that runs your boot release you are having problems with
Was this
answer
helpful?
Yes
No
Thursday, February 5th, 2009 AT 7:56 AM
Tiny
JAULT01
  • MEMBER
  • 51 POSTS
The boot was problematic before this happened, but I got your info and will follow your instructions. Thanks!

Should it matter that I swapped the harnesses for the blower? (Aside from making sure that wiring is correct?)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, February 5th, 2009 AT 8:35 PM
Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
As long as they are all in the proper places, the connector doesnt matter
Was this
answer
helpful?
Yes
No
Thursday, February 5th, 2009 AT 9:43 PM

Please login or register to post a reply.

Related Blower Fan Replace/Remove Content

How to Replace the A/C Blower Motor
VIDEO
How to Replace the A/C Blower Motor
Instructional repair video
VIEW MORE

Sponsored links