SPONSORED LINKS

1994 Isuzu Trooper

Tiny
DRAGONMW
  • MEMBER
  • 1994 ISUZU TROOPER
Transmission problem
1994 Isuzu Trooper 6 cyl Four Wheel Drive Manual

My clutch finally seen it's last days so I ordered a new clutch kit, pressure plate, throw out bearing clutch, the whole deal. My mechanic installed the whole thing and to no surprise complained about the amount of work involved. After a pricey cost of labor I was finally out of the garage and on the road. Only after two days the throw out bearing popped out of the pressure plate.
I returned the truck and after another new kit and complete assembly this time after starting the truck to leave I depressed the clutch pedal and the the fork pulled the bearing out again. What would cause such a problem.
SPONSORED LINKS
Sunday, March 1st, 2009 AT 10:38 PM

1 Reply

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Hi there, either the clip that locks the release bearing & carrier onto the fork is faulty, or the clip that locks the fork onto the pivot is faulty.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Monday, March 2nd, 2009 AT 3:15 AM

Please login or register to post a reply.

Related Transmission Clutch Throw Out Bearing Replace/Remove Content

Throwout Bearing - Secondary Cylinder Replacement
GUIDE
Throwout Bearing - Secondary Cylinder Replacement
A throwout bearing/secondary cylinder is used to apply force against the clutch pressure plate to release the clutch disc and should be replaced as part of the normal clutch...
VIEW MORE

Sponsored links