Not running

1998 INTERNATIONAL TRUCK
13,000 MILES • 7.3L • V8 • 2WD • MANUAL
Avatar
BLACK60CHURCH
  • MEMBER
  • 6 POSTS
Put engine in truck ran perfect and let it set overnight and the lpop will not pump and the hpop is dumping oil back in oil pan and lpop will not fill it up. Truck listed above has a 444 engine.
Mar 28, 2018 at 12:56 PM
Advertisement
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,832 POSTS
  • ASE Certified Mechanic
Hello,

Not sure about Ipop? is the engine turning over and not starting or not cranking over?

Please let us know.

Cheers, Ken
Mar 30, 2018 at 10:50 AM
Avatar
BLACK60CHURCH
  • MEMBER
  • 6 POSTS
Engine turns over fine. we installed engine and it ran good. good oil pressure and started good. let it set overnight now will not build up oil pressure.
Mar 30, 2018 at 11:51 AM
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,832 POSTS
  • ASE Certified Mechanic
I assume you say this because the gauge shows low? or are you hearing engine noises like lifter clatter? If it is a gauge issue I would start by replacing the sender or rolling in a mechanical gauge. Some causes for low oil pressure is plugged oil pick up screen bad oil pump and internal oil galley plug has fallen oil or excessive clearance in the rod and crankshaft bearings.

Please let us know what you find. We are interested to see what it is.

Cheers, Ken
Mar 31, 2018 at 11:25 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.