Replaced intake manifold on my 03 mustang gt and car still won't start. Been sitting since October of last year
Feb 16, 2023 at 5:43 PM
Intake manifold gasket
2003 FORD MUSTANG
JOSHD044
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
When you have a crank / no start condition, it is usually the result of either a loss of fuel or ignition spark.
There are other things that can cause it, so, if possible, record it cranking and upload it for me to hear.
We need to narrow things down. Try this. See if the engine starts using starting fluid and then stalls. If it does, we aren't getting fuel to the engine. If there is no change, then I need you to check for spark.
Here is a link that explains how to check:
https://www.2carpros.com/articles/how-to-check-for-ignition-spark
Start with this and let me know the results.
Take care,
Joe
When you have a crank / no start condition, it is usually the result of either a loss of fuel or ignition spark.
There are other things that can cause it, so, if possible, record it cranking and upload it for me to hear.
We need to narrow things down. Try this. See if the engine starts using starting fluid and then stalls. If it does, we aren't getting fuel to the engine. If there is no change, then I need you to check for spark.
Here is a link that explains how to check:
https://www.2carpros.com/articles/how-to-check-for-ignition-spark
Start with this and let me know the results.
Take care,
Joe
Feb 17, 2023 at 9:06 PM
Advertisement