Impact wrenches

2003 CHEVROLET SILVERADO
120,000 MILES
Avatar
MIKE1961
  • MEMBER
  • 24 POSTS
Hello all you full and part time mechanics out there! I've decided I need an impact wrench in the 450-650 ft/lb range. What type or brand do you recommend I buy?
Jan 20, 2016 at 9:04 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
PACO8224
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 117 POSTS
I have a cornwell that had for years and never have me a problem. I also had a Mac but it gave me problems all the time. Never had a snap on but know a few techs that do and they are really good also
Jan 20, 2016 at 9:29 PM
Advertisement
Avatar
WRENCHTECH
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 20,761 POSTS
Ingersol Rand is the most recognized brand in the industry. The IR231 has been the workhorse for cheap money for years. It can be bought for under $150 routinely. That unit is rather heavy and has rated torque in the 600 range. For around $250 to $300 you can move up to the lightweight, titanium case guns in the 800 to 1000 ft lbs torque range.
Jan 21, 2016 at 2:22 AM