The cable that supplies power to the ignition coil plug is broken. Is there a cable that I could jump from the power supply to the ignition coil?
Aug 23, 2020 at 7:31 PM
Ignition coil
2009 NISSAN ALTIMA
BENJAMIN BOUTWELL
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Each cylinder has its own coil. The power to them goes through the power-train control module. You don't want to run power to it at all time and certainly don't try to power the PCM.
The only thing I can think of is to try and repair the connector or see if you can get a used connector from a salvage yard and splice it in properly. If you contact a dealer, I'm not even sure if they will be able to provide just one. It is part of a wiring harness.
Let me know if you have other questions.
Joe
The only thing I can think of is to try and repair the connector or see if you can get a used connector from a salvage yard and splice it in properly. If you contact a dealer, I'm not even sure if they will be able to provide just one. It is part of a wiring harness.
Let me know if you have other questions.
Joe
Aug 23, 2020 at 8:36 PM
Advertisement