Hyundai readiness test is not ready

HYUNDAI

KB20

MEMBER
21 POSTS
FOLLOW

Background: 2002 Hyundai Santa Fe, I had to replace the battery. Unfortunately this was right before I took it into inspection. Apparently the inspection computer talks to the car computer and looks at its readiness test results. They all reset after changing a battery so they were "Not Ready" or "INC" therefore I failed the inspection. Not a problem, I had 45 days for the tests to complete. All but one has completed, that one is the Catalyst Monitor. I've driven about 2500 miles over the last month and the test still has not completed. 500 of the 2500 miles were a at one time. Is this normal? What can I check. I has my own scanner now so is there anything I can look for. There are no faults registered. Please Help.

Sep 20, 2007 at 9:59 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

BMRFIXIT

CAR REPAIR CONTRIBUTOR
19,053 POSTS

[quote:64aaff9e37="kb20"]Background: 2002 Hyundai Santa Fe, I had to replace the battery. Unfortunately this was right before I took it into inspection. Apparently the inspection computer talks to the car computer and looks at its readiness test results. They all reset after changing a battery so they were "Not Ready" or "INC" therefore I failed the inspection. Not a problem, I had 45 days for the tests to complete. All but one has completed, that one is the Catalyst Monitor. I've driven about 2500 miles over the last month and the test still has not completed. 500 of the 2500 miles were a at one time. Is this normal? What can I check. I has my own scanner now so is there anything I can look for. There are no faults registered. Please Help.[/quote:64aaff9e37]
did you try to get the sticker again if not you should

catalyst is the convertors
2500 should be more than enogh
did you try the freeway
you can check O2 sensors before & after cat

Sep 20, 2007 at 8:06 PM