How to replace fan motor step by step instructions needed.
Jun 1, 2018 at 12:43 AM
Fan motor replacement
PAUL SANCHEZ
- MEMBER
- 1 POST
For blower motor replacement:
1. Disconnect battery ground cable.
2. Remove right sound insulator panel from under instrument panel.
3. Remove rear retaining screws from electrical convenience center, then loosen front screw and slide convenience center out.
4. Disconnect electrical connector at motor and remove harness from clip.
5. Remove blower motor mounting screws and blower motor.
6. Reverse procedure to install.
1. Disconnect battery ground cable.
2. Remove right sound insulator panel from under instrument panel.
3. Remove rear retaining screws from electrical convenience center, then loosen front screw and slide convenience center out.
4. Disconnect electrical connector at motor and remove harness from clip.
5. Remove blower motor mounting screws and blower motor.
6. Reverse procedure to install.
Jun 1, 2018 at 1:02 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.