1997 Honda Prelude color coded rod bearings

1997 HONDA PRELUDE
107,000 MILES • 4 CYL • FWD • MANUAL
Avatar
GINO64
  • MEMBER
  • 1 POST
I have a stock crankshaft and aftermarket pistons and rods. The stock rods all have different color codes.The aftermarket rods say use all green code bearings. Is this correct.
Jul 25, 2008 at 10:29 AM
Advertisement
Avatar
KHLOW2008
  • ✓ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Hi gino64,

If you want to get the most accurate color codes, you need to use plastigage to measure the clearance to determine if it is correct.

Since it is after market conrods, ( what was wrong with the original rods), it most probably won't be as accurate. Marks are punched on the crankshaft and conrods their combination determines the color codes of the bearings.
Aug 3, 2008 at 11:35 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.