2001 Honda Odyssey Power Loss and Warning Lights

2001 HONDA ODYSSEY
91,962 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
LAMBERTS2008
  • MEMBER
  • 1 POST
Recently, while driving on the highway (100km/h) i was greeted with the check engine light, and the TCS light, as well as a bucking/sputtering engine with power loss. Dropping back to about 80 km/h while pulling over, she returned to normal, but the lights remained. With the foot on the break and put it in gear, and allowing throttle, the van sputters and bucks, but is fine while idling. The TCS light comes on near 40 km/h.
Dec 17, 2008 at 9:29 AM
Advertisement
Avatar
KHLOW2008
  • ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Hi Lamberts2008,

Get a free scan done at your local Autozone or O'Reily's parts outlet and let us know the exact trouble code.
Dec 17, 2008 at 9:53 AM
Avatar
HONDATECH74
  • MEMBER
  • 34 POSTS
[quote:c31d5c8322="Lamberts2008"]Engine Performance problem
2001 Honda Odyssey 6 cyl Front Wheel Drive Automatic 91962 miles

Recently, while driving on the highway (100km/h) i was greeted with the check engine light, and the TCS light, as well as a bucking/sputtering engine with power loss. Dropping back to about 80 km/h while pulling over, she returned to normal, but the lights remained. With the foot on the break and put it in gear, and allowing throttle, the van sputters and bucks, but is fine while idling. The TCS light comes on near 40 km/h.[/quote:c31d5c8322]This sounds like an egr problem but without dtc's from the engine light I can't be sure.
Feb 27, 2009 at 8:51 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.