2000 Honda Odyssey Hatch Lock is Loose

2000 HONDA ODYSSEY
78,800 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
MICOOPE
  • MEMBER
  • 2 POSTS
The four bolts that hold the hatch lock of my Odyssey in place have become loose and the hatch no longer locks. It seems like a simple fix- as long as I can get behind the panel to re-fasten the bolts. I removed two screws on the underside of the door (one on each side of the lock), but the panel won't come loose.

How do I remove that panel? Do I need to remove to repair the lock?

Any help is appreciated.
May 1, 2008 at 9:49 PM
Advertisement
Avatar
2CARPRO JACK
  • ASE Certified Mechanic
  • 11,533 POSTS
  • ASE Certified Mechanic
Those 2 screws on the sides of the lock may be what is holding the lock in the door. To remove the panel, pop the 2 small plugs out of the grab handle ends and remove the retaining bolts. From there the panel will pop off the door, sometimes the clips can be a little stubborn, once one pops off, you can look behind the panel to se where the next one is to help pop it off with a long flat screwdriver
May 4, 2008 at 8:30 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.