SPONSORED LINKS

2000 Honda Accord interchangeability of throtell body and I

Tiny
IAMFURQAN
  • MEMBER
  • 2000 HONDA ACCORD
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 142,300 MILES
I have accord 2000 amarican version but I am living in Dubai. My car throtell body and IAC have been confirmed defective by local honda service. But problem is that here I dont have amarican version spareparts. Can I replace gulf version of throtell body and IAC on my amarican accord, if it is posible can you tell me how can I calibrate these two parts so that I can put them in my car.
SPONSORED LINKS
Tuesday, August 12th, 2008 AT 5:08 AM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi iamfurqan,

They are compatible and no calibration is required.
Was this
answer
helpful?
Yes
No
Tuesday, August 12th, 2008 AT 11:27 AM
Tiny
IAMFURQAN
  • MEMBER
  • 16 POSTS
Hi khlow2008,
are you sure they are same, cause local honda service has asked me that they have to get these parts from Japan since gulf spacification IAC and throttel body are not compateble to amarican model.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, August 13th, 2008 AT 10:26 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi iamfurqan,

Based on data available to me, they are interchangeable. For Honda people, they would say it is different as long as is is not made in the same place.

I have done changes for earlier models and there were no differences.
Was this
answer
helpful?
Yes
No
Thursday, August 14th, 2008 AT 8:00 AM

Please login or register to post a reply.

Related Idle Air Control Replace/Remove Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links