I have changed many starters before on vehicles where the starter is located underneath, but on my 1992 Accord, it is mounted on the left side of the engine.
It looks pretty tight in there.
Any tips to be aware of when replacing this? Is this something a Honda newbie could do?
SPONSORED LINKS
Thursday, November 12th, 2009 AT 11:01 AM
3 Replies
HONDA TECH 1818
MECHANIC
536 POSTS
Yes, you can DIY. First you will need to disconnect the battery negative terminal, then the starter solenoid wire and the 12mm bolt that holds the 12 volt cable from the starter. There is a 14mm bolt on top and a 17mm bolt on the back bottom of the starter. The 17mm bolt could be very tight so you will need a 1/2 inch breaker bar to get loose.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+2
Friday, November 13th, 2009 AT 2:15 AM
SHERRYL GRAHAM BURRIS
MEMBER
2 POSTS
I know the bottom bolt is 17mm, but what is the length?
Was this
answer
helpful?
Yes
No
+1
Monday, August 27th, 2018 AT 12:08 PM
FREEMBA
MECHANIC
1,152 POSTS
The bottom bolt is 4.5 inches long (that is equal to 114.3 mm).