Wouldn't shift as usual. Pulled over to shut off and let it rest a minute. But it didn't restart.
Jun 25, 2019 at 1:03 PM
High rpm's and not shifting up
2007 CHRYSLER TOWN AND COUNTRY
RADIO GUY
- MEMBER
- 1 POST
Advertisement
JACOBANDNICKOLAS
- ✓ASE Certified Mechanic
- 110,194 POSTS
Welcome to 2CarPros.
Honestly, we need to start by scanning the computer to see what diagnostic trouble codes are stored. That will direct us.
Here is a quick video that shows how a scanner is used:
https://youtu.be/YV3TRZwer8k
I realize most people don't own a scanner, but often times a parts store will lend or rent one to you. That is really where we need to start. If you can do that, let me know what codes are found.
Here is a link that discusses the most common reasons for a crank no start condition. See if it helps.
https://www.2carpros.com/articles/car-cranks-but-wont-start
Let me know what you find or if you have other questions.
Take care,
Joe
Honestly, we need to start by scanning the computer to see what diagnostic trouble codes are stored. That will direct us.
Here is a quick video that shows how a scanner is used:
https://youtu.be/YV3TRZwer8k
I realize most people don't own a scanner, but often times a parts store will lend or rent one to you. That is really where we need to start. If you can do that, let me know what codes are found.
Here is a link that discusses the most common reasons for a crank no start condition. See if it helps.
https://www.2carpros.com/articles/car-cranks-but-wont-start
Let me know what you find or if you have other questions.
Take care,
Joe
Jun 26, 2019 at 7:01 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.