And the distributor turn's clock wise.
Jun 22, 2023 at 9:33 AM
Harmonic balancer, Which way does the bolt turn on the crank shaft "left" or "right"?
1995 CHEVROLET SILVERADO
KENNY210
- MEMBER
- 1 POST
Advertisement
JACOBANDNICKOLAS
- ✓ASE Certified Mechanic
- 110,193 POSTS
Hi,
I checked through two manuals and there is nothing indicating anything that isn't standard. So, with that, to loosen it, turn it counterclockwise. Turn it clockwise to tighten.
If you are having trouble removing it, if possible, use an air impact gun. It should take it off for you.
Now, as far as the distributor, it is the same standard thread.
Let me know if this helps or if you have questions.
Take care,
joe
I checked through two manuals and there is nothing indicating anything that isn't standard. So, with that, to loosen it, turn it counterclockwise. Turn it clockwise to tighten.
If you are having trouble removing it, if possible, use an air impact gun. It should take it off for you.
Now, as far as the distributor, it is the same standard thread.
Let me know if this helps or if you have questions.
Take care,
joe
Jun 22, 2023 at 9:56 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.