Hand pull park brake wire?

2010 MAZDA 3
383,440 MILES • 2.0L • 4 CYL • 2WD • AUTOMATIC
Avatar
TERRY WILLIAMS4
  • MEMBER
  • 2 POSTS
Should the single wire (purple) to the park brake switch have battery voltage when key is in acc or on position or is it actually a ground wire? My vehicle has 12v from the park brake wire.
Oct 10, 2025 at 6:35 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STEVE W.
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 15,146 POSTS
It should have voltage on it. Then when you pull it to apply the brake it connects to ground and turns on the brake indicator. It works just like the low brake fluid lamp.
Oct 10, 2025 at 8:00 PM
Advertisement
Avatar
TERRY WILLIAMS4
  • MEMBER
  • 2 POSTS
Thanks Steve.Very helpful.Cheers.
Oct 10, 2025 at 10:16 PM
Avatar
STEVE W.
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 15,146 POSTS
You are welcome.
Oct 12, 2025 at 12:53 PM
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
STEVE W. is one of our best! Use 2CarPros anytime we are here to help.
Oct 14, 2025 at 12:47 PM