1997 GMC Sierra Water pump

1997 GMC SIERRA
Avatar
97GMCZ71
  • MEMBER
  • 1 POST
Engine Cooling problem
1997 GMC Sierra 6 cyl Four Wheel Drive Automatic

I just replaced my water pump and radator and all new hoses. I still have a small leak and cant figure it out. I put the gaskets on the water pump along with right stuff gasket sealer, and i still have coolant looks like leaking down from the water pump area. I cant figure it out. I even torque down the bolts to 30 foot pounds. Would you have any clue what i might have down wrong or what might be leaking on this type of truck. It has a 4.3L v6 in it. Should i checkk the torque again, cause it i took it to a shop they would only torque it one time. any suggestions would be greatly appreciated. thanks
Jan 11, 2009 at 9:43 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Hi:
Are you sure the leak is from the water pump and not running down from the intake gasket? They do have a history with intake problems. If it's the waterpump again, mark where the leak is so you can inspect that area when you remove it. Also, you can try to retorque it to see if that helps.

Let me know what you find.

Joe
Jan 12, 2009 at 4:24 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.