1993 GMC Sierra Truck Won't Start

Tiny
DJ09041966
  • MEMBER
  • 1993 GMC SIERRA
  • V8
  • 4WD
  • MANUAL
  • 137,000 MILES
Last week, radiator plug blew out and had to be replaced. Replaced radiator plug and thermostat and truck was back on road. About a week later, I went to move truck and it wouldn't start. I checked and replaced distributor rotor button, pick up coil, checked electrical module, and regular coil. It turns over but no spark. This has stump me and three other car parts stores. Can you help?
Sunday, December 9th, 2007 AT 2:21 PM

4 Replies

Tiny
BLACKOP555
  • MECHANIC
  • 10,371 POSTS
Can you check to see if the coil is putting off voltage? Please post back.
Was this
answer
helpful?
Yes
No
+1
Sunday, December 9th, 2007 AT 3:20 PM
Tiny
DJ09041966
  • MEMBER
  • 3 POSTS
Coil is getting juice. We tried a new electrical module. Still no power. We tried to jump the Sierra from another truck, and still won't fire.
Was this
answer
helpful?
Yes
No
-1
Monday, December 10th, 2007 AT 7:52 PM
Tiny
BLACKOP555
  • MECHANIC
  • 10,371 POSTS
Is the coil putting off power though? Also line up #1 cylinder at TDC then check to see if hte rotor is pointing at #1. Also you may need a new crank sensor if the coil is putting off voltage.
Was this
answer
helpful?
Yes
No
+1
Tuesday, December 11th, 2007 AT 4:44 PM
Tiny
DJ09041966
  • MEMBER
  • 3 POSTS
I'm not sure what you said but here is an update. The four wires that go from the firewall into the ignition/electrical module doesn't have power. Any suggestions.
Was this
answer
helpful?
Yes
No
Tuesday, December 11th, 2007 AT 8:27 PM

Please login or register to post a reply.

Sponsored links