Replacing ignition in a 1994 Delta 88

1994 GMC
Avatar
OLDS
  • MEMBER
  • 2 POSTS
I have a 1994 Delta 88 that turns over but won't start. Its in a friends pro shop and has been checked over with the expensive scan. We've replaced the module in the tran, the coil pack module, the coils and still no spark. We think its the ignition switch or the computer. Want to change the ignition switch first.

Thank you
Dec 22, 2006 at 2:18 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
GARFIELD
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 197 POSTS
Are you getting 12 volts to the ignition module?
Dec 23, 2006 at 6:16 AM
Advertisement
Avatar
OLDS
  • MEMBER
  • 2 POSTS
I'm not sure, the mechanic said the next thing to try was replacing the ignition switch. Currently we have it down at an alarm shop that is removing an old alarm to make sure that isn't the problem. I was just preparing for the next move if the alarm turns out to not be the problem.

Should I check at the ignition switch/ moduce for twelve volts??
Dec 23, 2006 at 1:06 PM