ok
my truck wont start
fule pump wroks
i changed the vcm because a deler said that if didnt have check engen light that it was gon
after changing it i got the truck to start and ran it for two hr. shut it off wont start again i had no dash lights again and their wasnt any power to 3 fuses 10 amp and two 20 anmp fuses so i put ajumper from the bat. to the pink feed wire on the coil and this back feed to those fuses and the i had dash display again still wont start so with that i left the jumper in line and unpluged the crank sensor then pluged it back in then i heard the fule pump relay come on so the crank sensor works and i have fule so i removed the jumper wire went and got a code reader pluged in in and turned they on and it came up as no link so i put the jumper back on and pluged the code reader in and it said one code found P1351 witch is ignition coil voltage to high so i that that was because i was feeding it off the bat. soi went and bought a inghtion switch harness and instaled it now i have dash light displays but the truck wont start and i have power on those fuses that didnt have before and the fule relay come but the truck wont start what is going on here will verifi that i have power at the distributor and fire to the plugs to day
my truck wont start
fule pump wroks
i changed the vcm because a deler said that if didnt have check engen light that it was gon
after changing it i got the truck to start and ran it for two hr. shut it off wont start again i had no dash lights again and their wasnt any power to 3 fuses 10 amp and two 20 anmp fuses so i put ajumper from the bat. to the pink feed wire on the coil and this back feed to those fuses and the i had dash display again still wont start so with that i left the jumper in line and unpluged the crank sensor then pluged it back in then i heard the fule pump relay come on so the crank sensor works and i have fule so i removed the jumper wire went and got a code reader pluged in in and turned they on and it came up as no link so i put the jumper back on and pluged the code reader in and it said one code found P1351 witch is ignition coil voltage to high so i that that was because i was feeding it off the bat. soi went and bought a inghtion switch harness and instaled it now i have dash light displays but the truck wont start and i have power on those fuses that didnt have before and the fule relay come but the truck wont start what is going on here will verifi that i have power at the distributor and fire to the plugs to day
Jan 7, 2009 at 5:58 AM
