1993 GMC C1500 Coil

1993 GMC C1500
166,000 MILES • V8 • 2WD • AUTOMATIC
Avatar
ROBINTX
  • MEMBER
  • 2 POSTS
I have a problem where my engine will not start. I am getting power to the coil. But nothing out of the coil. I am not getting fire at all when I crank the engine. No fire on coil going to Distributor.
Any help would be appreciated.
Changed the coil and coil wire.
Thanks
Jul 4, 2008 at 3:11 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
MASTERTECHTIM
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 4,750 POSTS
replace the ignition module in the distributor and if that doesnt work you will need a pick up coil in the distributor but its most likely the module. good luck and let me know how you make out
Jul 4, 2008 at 6:23 PM
Advertisement
Avatar
ROBINTX
  • MEMBER
  • 2 POSTS
Matertechtim, exactly the problem thanks a lot. It was driveing me crazy. I could grab the coil and no shock. Replaced the module started up no problem I appreciate your help.
robintx
Jul 5, 2008 at 6:01 AM
Avatar
MASTERTECHTIM
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 4,750 POSTS
no problem
Jul 5, 2008 at 5:11 PM