1992 Geo Tracker fuel injector

1992 GEO TRACKER
Avatar
CHAD4664
  • MEMBER
  • 1 POST
Electrical problem
1992 Geo Tracker 4 cyl Two Wheel Drive Manual

My 1992 GEO Tracker will not start. I am not getting fuel thru the injector. I am getting fuel to the injector but not thru the injector. I checked the fuses and they are ok. I also checked the resistance and got 1.6ohms. I also used a noid-lite tester on the injector and the light wouldn't light. I was told that their was no power to the injector. So i checked the voltage at the computer and injector and got 1.6 volts. Is that the correct voltage coming out of the computer. Does this mean that my computer, injector or my wiring is bad. thank you
Sep 30, 2010 at 8:29 PM
Advertisement
Avatar
BLUELIGHTNIN6
  • ASE Certified Mechanic
  • 16,542 POSTS
  • ASE Certified Mechanic
volts should be 12 , not gonna run with just 1.6 volts, cuplrit is most likely going to be the computer itself
Sep 30, 2010 at 8:38 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.