Fuel pump not working

2002 FORD EXPEDITION
180,000 MILES • 5.4L • V8 • 4WD • AUTOMATIC
Avatar
HEIDE1234
  • MEMBER
  • 2 POSTS
Started cutting out and would shut off, would not start back up. Let it sit for couple hours started and ran for a week then cut out again in town. Now will not start and fuel pump is not working. Checked fuses and swapped relays around. What should I try next? I do not feel it is the pump itself.
Jul 2, 2018 at 4:35 AM
Advertisement
Avatar
DANNY L
  • Experienced Mechanic
  • 5,648 POSTS
Hello, I am Danny.

I have dealt with many in-tank fuel pump problems and this sounds like one. I would suggest performing a fuel system pressure test. Many auto part stores have tool loaner programs(AutoZone,Pep Boys, O'Reilly's) to rent you a tester. With the key on engine running pressure should be 28-45 PSI and key on engine off should be 35-45 PSI. You can find a Schrader valve on the fuel rail to attach the pressure tester. I am attaching a tutorial on how to test the fuel pressure and how to test the fuel pump relay. Hope this helps and feel free to ask any questions. Danny-

https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit


Jul 2, 2018 at 10:47 AM
Avatar
BMDOUBLE
  • Experienced Mechanic
  • 1,139 POSTS
Symptoms match perfectly with a failing fuel pump. It’s right at the mileage when they fail, see them all the time at my dealership. But by all means do your tests.
Jul 3, 2018 at 12:58 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.