Advertisement

Check engine light back firing no power?

224,000 MILES • 5.0L • AUTOMATIC
Avatar
CHEFROB
  • MEMBER
  • 6 POSTS
Flashing check engine light back firing no power just installed upgraded fuel injection system plugs wires new dist cap and rotor new coil ignation mod fuel filter pcv valve purge sel new converter new vacuum lines
Nov 21, 2026 at 8:46 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,251 POSTS
A flashing CEL indicates an active misfire. Before anything, scan to see what cylinder is causing the misfire, so you can focus specifically on that cylinder or cylinders. Also, recheck to make sure the plug wires are in the correct order.

I attached a pic below showing the firing order and cylinder locations. Double-check this and let me know what you find. Also, if you could scan it to see which cylinder or cylinders are causing the issue, it will help make things easier.

Take care,

Joe

See pic below.
Nov 21, 2026 at 9:42 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle