driving and engine cut off has not started since?

2010 LINCOLN MKS
92,000 MILES • 3.7L • V6 • 2WD
Avatar
MYMKS
  • MEMBER
  • 2 POSTS
Where is this switch located?
Feb 14, 2024 at 2:27 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
I checked all of the engine wiring diagrams and Ford doesn't use the inertia switch in this model. What problem are you having?
Feb 14, 2024 at 11:24 AM
Advertisement
Avatar
MYMKS
  • MEMBER
  • 2 POSTS
Was driving and engine cut off hasn't started since. then as a side note I had just put gas in from a gas can with aftermarket funnel.
Feb 14, 2024 at 8:19 PM
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
That might do it if the fuel was old/contaminated. I would try starting fluid and if that changes nothing let's check for spark.

Here is a guide and video to help us see what's going on:

https://www.2carpros.com/articles/car-not-running-advanced

and

https://youtu.be/baq_aEWNQ0Y?si=wIQTnmTJ-yJPSFjL

and

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please go over these guides and get back to us.
Feb 15, 2024 at 7:56 AM
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
anything?
May 11, 2024 at 10:25 AM