no start no go

2000 VAUXHALL FRONTERRA
97,000 MILES • 2.2L • 4 CYL • TURBO • 4WD • MANUAL
Avatar
FRONTY
  • MEMBER
  • 1 POST
Hi can anyone help

DTI model.

Turns over but will not start. I have reprogrammed a different set of ECU and Immo. also, replaced pump with known good all of spare front which started. reprogrammed two keys which open and lock the doors okay turns on and off alarm. when you crank the engine the engine turns over, but does not fire.
I have tech2 which says fuel cut off active there are now no DTC's from the engine or immo.

checked fuses and replaced all relays all okay. the only thing i can see on the truck which does not work is the temperature on the display. surely this would not stop the engine from starting.
any help would be great.
Jan 12, 2017 at 4:36 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
we have no information on these as they are not sold in US. but try a security reset on this that may be the problem. and yes it has that.
Jan 12, 2017 at 5:56 AM
Avatar
STEVE W.
  • ✓ASE Certified Mechanic
  • 15,200 POSTS
  • ASE Certified Mechanic
Fuel cut off sounds like a roll over type valve. The US version of that rig (Isuzu Amigo/Rodeo) had one on the early models. It was a simple solenoid valve. Not sure what they did on the overseas versions.
Jan 12, 2017 at 10:09 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.