Firing order diagram?

.044 (In thousandths of an inch) Here is a guide that will help you install them

https://www.2carpros.com/articles/how-to-change-spark-plugs

Here is the firing order as well

Firing order .................... 1-4-2-5-3-6

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Here is the engine ignition firing order - Firing order 1-4-2-5-3-6 It sounds like you crossed two or more wires...re route to correct positions!

Here is a video of the job being done.

https://youtu.be/iDgXwKA-IIc

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Cheers

Here is the engine spark plug firing order. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Cheers

As long as they are in the right place, I cannot see how it makes any difference. The spark plug wires are the only thing you disconnected, worked on? Have you check applicable trouble codes, to see if codes point to particular cylinder?

You could try using a digital multi-meter, low voltage setting, engine idling, if it will idle, Touch meter lead to spark plug wire, do not penetrate the insulation or take anything loose, it is an inductive reading, very low tech, non-intrusive. The readings I get, usually, are about.6 or.7 volts. The point is if get a reading bouncing off of zero, that is the wire I want to check.
Maybe you need new spark plug wires or not plugged in all the way? Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

See below:

Engine size???????????????

2001 Ford Taurus V6-3.0L DOHC VIN S
6-Cyl Firing Order: 1 4 2 5 3 6

2001 Ford Taurus V6-3.0L VIN 2 Flex Fuel
6-Cyl Firing Order: 1 4 2 5 3 6

Hope this helps ..

4 cylinder

6 cylinder

Hello,

The firing order for you engine is is below (click to enlarge). Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.