1998 Ford Taurus engine will not fire

20,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
JBALD
  • MEMBER
  • 1 POST
I reolaced the water pump in my 98 ford tarus 200,000 miles. Now the engine will turn but not fire. When I replaced the water pump I disconnect and removed the altenator and disconnected the crank sensor but I connected everything back. Again the engine will turn but not fire. Any Idea of what the problem is?

Thanks
Oct 7, 2010 at 1:24 AM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Do below

Get a helper disconnect a sparkplug wire or 2 and ground it to the engine atleast 3/16 away from ground-have helper crank engine over-do you have a snapping blue spark? If so-you have a fuel related problem, check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light. No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,cap and rotor,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it and keep testing
Feb 17, 2017 at 6:53 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement