1994 Ford Taurus 3.8 cranks but won't start

Avatar
CORBINSCOACH
  • MEMBER
  • 2 POSTS
A friend of mine has a 1994 Ford Taurus that turns over but won't start. I checked the fuel pressure on the fuel bar (getting 40psi) and checked ignition for fire (getting good fire). He replaced the black box on top of the radiator. Checked all fuses both inside cab and under hood. Any other suggestions? Thanks in advance.
Sep 27, 2007 at 9:12 AM
Avatar
BLMO
  • MEMBER
  • 72 POSTS
You need 4 things for a car to start: gas, spark, compression, and timing.

You're getting gas and spark. The next step is to check your compression on at least 3 cylinders. If that passes, then check your timing.

The two main components that directly affect timing are the crankshaft position sensor and the camshaft position sensor.

I don't know if you are allowed to adjust the timing using a timing light - that is usually covered by the two sensors mentioned above.
Mar 16, 2017 at 5:41 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle