2002 Ford Ranger DRIVERS SIDE DOOR PANEL

2002 FORD RANGER

MR--JIM

MEMBER
1 POST

Interior problem
2002 Ford Ranger 6 cyl Four Wheel Drive Automatic 70K miles

HOW DO I REMOVE THE DRIVERS SIDE INTERIOR DOOR PANEL TO GAIN ACCESS TO POWER WINDOW MOTOR? CLIPS, SCREWS? RANGER HAS POWER LOCKS, WINDOWS,& MIRRORS
THANKS

Jan 25, 2010 at 8:20 PM

BLUELIGHTNIN6

✓ASE Certified Mechanic
16,542 POSTS

Remove the front door trim finish panel screws.
Separate the front door trim finish panel from the front door trim panel.
Disconnect the power mirror and power door lock electrical connectors, if equipped.
Remove the power window switch screws, if equipped.
Remove the front door trim finish panel.
Remove the front door trim panel screws.
Remove the front door trim panel.
Position the water shield aside.

Jan 25, 2010 at 8:29 PM

BLUELIGHTNIN6

✓ASE Certified Mechanic
16,542 POSTS

Remove the front door trim finish panel screws. Separate the front door trim finish panel from the front door trim panel. Disconnect the power mirror and power door lock electrical connectors, if equipped. Remove the power window switch screws, if equipped. Remove the front door trim finish panel. Remove the front door trim panel screws. Remove the front door trim panel. Position the water shield aside.

Jan 25, 2010 at 8:30 PM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.