Advertisement

1998 Ford Ranger Stalling problems

125,000 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
STARNEWS
  • MEMBER
  • 3 POSTS
Truck stalls as soon as it is put into drive, and is making a loud ticking noise while idiling. It will go into reverse and neutral, without stalling.
Jan 29, 2009 at 1:33 AM
Advertisement
Avatar
RACEFAN966
  • ✓Experienced Mechanic
  • 5,029 POSTS
So first off when it stalls does it start right back up? Is the engine light on?
The noise which engine are you running 3.0 or 4.0 V-6? Is it like a tapping sound from the upper end like under the valve covers? Use a metal rod or long screw driver and put it on the valve cover and put you ear to it and listen to it and let me know what it sounds like to the best that you can. Get back to me and we will go from there.
Jan 29, 2009 at 2:35 AM
Avatar
RACEFAN966
  • ✓Experienced Mechanic
  • 5,029 POSTS
Have you found out anything yet? Just following up. Thanks.
Feb 4, 2009 at 2:49 AM
Advertisement
Avatar
STARNEWS
  • MEMBER
  • 3 POSTS
Thank you for checking. A family member went under the truck and adjusted something underneath, though I am not able to explain what he did, the truck went into drive and ran. But it is still stalling out continously, though now it now can be put into drive without instantly stalling. Not sure what to do at this point, other than to take it into a repair shop.
Feb 4, 2009 at 3:07 AM
Avatar
RACEFAN966
  • ✓Experienced Mechanic
  • 5,029 POSTS
Ok I would check the TPS and the IAC (Idle air control motor). If you have a digital multi meter and feel comfortable enough doing a couple of tests we can test those parts. Let me know what you want to do.
Feb 14, 2009 at 5:39 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle