not going into gear, while the truck is running

96,000 MILES • 6 CYL • 2WD • MANUAL
Avatar
DEMATTEO
  • MEMBER
  • 3 POSTS
my ranger is not going into gear, while the truck is running. when i shut it off it will go into gear. i checked the clutch fluid and it was a little low. i put fluid in it and pumped the clutch pedal, still nothing. it happened randomley while i was driving it.
Oct 14, 2009 at 7:30 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
If it shifts through the gears with the engine off, the trans is most likely fine. Have you ever serviced it? Also, if the problem is when it is running, does it seem to get worse the hotter the engine gets?
May 3, 2021 at 7:21 AM
Avatar
DEMATTEO
  • MEMBER
  • 3 POSTS
[quote:ae5119b0b5="Jacobandnickolas"]If it shifts through the gears with the engine off, the trans is most likely fine. Have you ever serviced it? Also, if the problem is when it is running, does it seem to get worse the hotter the engine gets?[/quote:ae5119b0b5]

i have not had it serviced and it does not matter if the engine is cold or hot. it did after about 5 mins of me drivin it.
May 3, 2021 at 7:21 AM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Chances are the clutch needs replaced, 96k isnt really that much on a clutch... you could also have a hydraulic issue

Here are some guides to read, they will help you figure out whats wrong

https://www.2carpros.com/articles/clutch-doesnt-work-sometimes-or-not-at-all

https://www.2carpros.com/articles/clutch-symptoms

https://www.2carpros.com/articles/how-to-replace-a-clutch
May 3, 2021 at 7:21 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle