Advertisement

1989 Ford Probe Puzzled?

194,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
KRISTIMCLAUGHLIN
  • MEMBER
  • 1 POST
My dad is helping me with repairs he has a lot of experience with repairs but mostly on much older vehicles and is currently stumped by what seems to be some kind of fuel injection issue. the engine turns but the car wont start. we checked the fuel inertia switch it was entirely removed it appears by a previous owner and the wiring bypasses it. the car has run for months without it. he re routed wiring for the fuel pump as it wasnt getting power at first but its now working at the car still wont start. we checked the fuel pressure and it is adequate as well. he has been able to start the car by directly sparaying starter fluid into it but as soon as he stops spraying it stops running. any ideas where to look next for the issue? injectors? and how are those tested?
Jan 23, 2009 at 1:18 PM
Advertisement
Avatar
BLUELIGHTNIN6
  • ✓Experienced Mechanic
  • 16,542 POSTS
Need to check for pulse at injectors. This requires an injector pulser tool to make injector pulse. Post results and I will follow up.



Thanks for using 2CarPros.com !
Jan 23, 2009 at 1:26 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle