2005 Ford Focus clutch

2005 FORD FOCUS
Avatar
KATHY.HALL
  • MEMBER
  • 6 POSTS
Transmission problem
2005 Ford Focus 4 cyl Front Wheel Drive Manual

my daughter was driving my car when the clutch peddle want go all the way down
Nov 22, 2009 at 7:17 PM
Advertisement
Avatar
MHPAUTOS
  • ✓ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
Hi there, you will need to establish if this is a mechanical problem with in the clutch or with the hydraulics and the master cylinder, i would open the bleeder and see if the pedal will travel to the floor with out any hard or tight spots, do this and report you findings.

Mark (mhpautos)
Nov 22, 2009 at 9:55 PM
Avatar
KATHY.HALL
  • MEMBER
  • 6 POSTS
thats the problem it want go to the floor it stops half way down. it gets hard at the end.
Nov 24, 2009 at 1:28 PM
Avatar
KATHY.HALL
  • MEMBER
  • 6 POSTS
what is a slavery
Nov 24, 2009 at 1:35 PM
Avatar
MHPAUTOS
  • ✓ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
You mean the slave cylinder, that is the cylinder on the transmission end of the clutch hydraulic system that actuates the clutch mechanism.

Mark
Nov 24, 2009 at 2:40 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.