how to replace water pump?
Jun 5, 2010 at 10:18 PM
2000 Ford Focus water pump leaks
2000 FORD FOCUS
ANDY05
- MEMBER
- 2 POSTS
Advertisement
JACOBANDNICKOLAS
- ✓ASE Certified Mechanic
- 110,194 POSTS
This is what I was able to find for you. Let me know if it helps. NOTE: It identifies the process for different engines. Select the correct one.
2.0L (VIN 3) Engines
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Water pump pulley Front cover Timing belt Timing belt tensioner Water pump
To install:
Install or connect the following:
Water pump. Tighten the bolts to 13 ft. lbs. (18 Nm). Timing belt tensioner Timing belt Front cover Water pump pulley Accessory drive belt Negative battery cable
Fill the cooling system.
Start the engine and check for leaks.
2.0L (VIN N) Engine And 2.3L (VIN Z) Engine
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Water pump pulley Water pump mounting bolts Water pump
To install:
Install or connect the following:
Water pump with new O-ring. Tighten the bolts to 89 inch lbs. (10 Nm). Water pump pulley. Tighten the bolts to 18 ft. lbs. (25 Nm). Accessory drive belt Negative battery cable
Fill the cooling system to the correct level.
Start the engine and check for leaks.
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Water pump pulley Water pump mounting bolts Water pump
To install:
Install or connect the following:
Water pump with new O-ring. Tighten the bolts to 89 inch lbs. (10 Nm). Water pump pulley. Tighten the bolts to 18 ft. lbs. (25 Nm). Accessory drive belt Negative battery cable
Fill the cooling system to the correct level.
Start the engine and check for leaks.
2.0L (VIN P) Engine
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Front cover Timing belt Timing belt tensioner Water pump
To install:
Install or connect the following:
Water pump. Tighten the bolts to 18 ft. lbs. (25 Nm). Timing belt tensioner Timing belt Accessory drive belt Negative battery cable
Fill the cooling system.
Start the engine and check for leaks.
2.0L (VIN 3) Engines
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Water pump pulley Front cover Timing belt Timing belt tensioner Water pump
To install:
Install or connect the following:
Water pump. Tighten the bolts to 13 ft. lbs. (18 Nm). Timing belt tensioner Timing belt Front cover Water pump pulley Accessory drive belt Negative battery cable
Fill the cooling system.
Start the engine and check for leaks.
2.0L (VIN N) Engine And 2.3L (VIN Z) Engine
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Water pump pulley Water pump mounting bolts Water pump
To install:
Install or connect the following:
Water pump with new O-ring. Tighten the bolts to 89 inch lbs. (10 Nm). Water pump pulley. Tighten the bolts to 18 ft. lbs. (25 Nm). Accessory drive belt Negative battery cable
Fill the cooling system to the correct level.
Start the engine and check for leaks.
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Water pump pulley Water pump mounting bolts Water pump
To install:
Install or connect the following:
Water pump with new O-ring. Tighten the bolts to 89 inch lbs. (10 Nm). Water pump pulley. Tighten the bolts to 18 ft. lbs. (25 Nm). Accessory drive belt Negative battery cable
Fill the cooling system to the correct level.
Start the engine and check for leaks.
2.0L (VIN P) Engine
Before servicing the vehicle, refer to the Precautions Section.
Drain the cooling system.
Remove or disconnect the following:
Negative battery cable Accessory drive belt Front cover Timing belt Timing belt tensioner Water pump
To install:
Install or connect the following:
Water pump. Tighten the bolts to 18 ft. lbs. (25 Nm). Timing belt tensioner Timing belt Accessory drive belt Negative battery cable
Fill the cooling system.
Start the engine and check for leaks.
Jun 7, 2010 at 10:33 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.