1992 Ford F-250 BALL JOINTS

JIM STAHL

MEMBER
1992 FORD F-250
V8
4WD
AUTOMATIC
102,000 MILES

I TRIED HAMMERING THE LOWER BALL JOINT OUT WITH A BRASS PUNCH AND HAMMER BUT IT'S TOO RUSTY. CAN I HEAT IT UP OR CUT IT OUT? THE MANUAL SAYS NOT TO BUT WHAT ELSE CAN I DO?

Thursday, October 22nd, 2009 AT 3:04 PM

1 Reply

DOCFIXIT

MECHANIC
18,828 POSTS

Was snap ring removed? need tool as in diagram or can use air hammer.

Please login or register to post a reply.

1996 Ford F-250 Leaf Springs

Recently, I Put An Add A Leaf Kit On My Front Springs To Level Out The Truck Along With 4 New Shocks. Now The Truck Rides Horrible. Would...

Asked by Lmichael59 ·

2 ANSWERS

1996

FORD F-250

GUIDE

Ball Joint

A ball joint is used to act as a universal swivel joint that connects the upper or lower control arms to the spindle which is where the axle bearing and wheel is supported....

2001 Ford F250

I Just Put New Tires On And I Am Seeing Choppy Wear On The Inside Portion Of The Front Tires. This Is A Straight Axel With Leaf Springs

Asked by Dmroz ·

1 ANSWER

2001