1998 Ford F150 4 WHEEL DRIVE

1998 FORD F-150
16,500 MILES • V8 • 4WD • AUTOMATIC
Avatar
MIKEBOCEK
  • MEMBER
  • 1 POST
I USED MY 4 WHEEL DRIVE ON A SATURDAY, WENT TO USE IT AGAIN ON MONDAY, NOTHING. SEEMS LIKE THERE IS NOTHING FROM THE SWITCH TO THE TRANSFER CASE. TESTED SWITCH, ALL FUSES, MODULES I COULD FIND, ALL GOOD. TOOK TRANSFER CASE OFF AND TRIED ON ANOTHER TRUCK, IT WORKS ON OTHER TRUCK, SAME WITH THE SWITCH. PUT BACK ON MY TRUCK, DOESN'T WORK. ANY IDEAS WHAT COULD BE WRONG?
Nov 13, 2009 at 9:48 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Are you getting power to the switch? Have you checked the wiring / plug to make sure there is no breaks in the wiring?
Nov 19, 2009 at 8:23 AM
Avatar
MIKEBOCEK
  • MEMBER
  • 1 POST
found the problem, after 22 hrs of labor tracing every wire, turns out gem module no good. thanks anyway
Nov 21, 2009 at 2:53 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.