2000 Ford Explorer oil pressure

Avatar
BRIAN18980
  • MEMBER
  • 1 POST
Engine Mechanical problem
2000 Ford Explorer 6 cyl All Wheel Drive Automatic

when i am driving it after i few min it looses oil pressure. could it be the oil pump
Nov 17, 2009 at 1:04 PM
Avatar
RICKMAR
  • ✓Experienced Mechanic
  • 170 POSTS
Hi Brian;


When you first start the engine is the oil pressure reading o.k.?

When you are driving it for a few minutes and you suddenly lose oil pressure, does the oil pressure gauge eventually show pressure again?

If the answers are "YES" to the two questions above. I would say the problem is a malfunctioning oil pressure sender.

When you drive the vehicle and the pressure gauge drops. Pull over and just let the engine idle.
If you do not hear any clattering/clicking sound or loud tappet noise after a brief period of letting the engine idle.
I would say you have a bad oil pressure sender.
If you do hear unusual noises shut the engine off "Immediately"
Hearing clicking/clattering or loud tappet noise , you have a bad oil pump because the engines moving parts are not receiving oil.
Good Luck;
Rick

Rick
Nov 18, 2009 at 8:41 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle