1996 Ford Explorer instructions on electric in tank fuel pu

1996 FORD EXPLORER
10,477 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
B.V.WILSONR
  • MEMBER
  • 1 POST
I wanted to know if you have instructions on installing an electric in tank fuel pump for a 1996 ford Explorer, 4.0 engine 6 cyl. 4 door, 4 wheel drive. Automatic Transmission.

PS Dont have a picture
Dec 17, 2008 at 11:43 AM
Advertisement
Avatar
DAVE H
  • ✓Experienced Mechanic
  • 13,383 POSTS
FUEL PUMP Removal Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE under FUEL SYSTEM. Remove fuel tank. Using fuel tank lock ring wrench, carefully rotate lock ring counterclockwise to release pump. See FUEL TANK LOCK RING WRENCH IDENTIFICATION table. Remove fuel pump from tank. FUEL TANK LOCK RING WRENCH IDENTIFICATION ApplicationTool No. ExplorerT90T-9275-A Installation Wipe seal area of tank clean. Position new "O" ring seal onto pump, using grease to hold it in position. Position fuel pump in tank so fuel return hose is not kinked. Install lock ring. DO NOT overtighten pump lock ring, as it may leak. Install fuel tank.


https://images.2carpros.com/forum/automotive_pictures/266999_pump_5.jpg

Dec 17, 2008 at 11:57 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle