2000 Ford Excursion turn signals, emergency flasher and bre

2000 FORD EXCURSION
110,000 MILES • V8 • 2WD • AUTOMATIC
Avatar
JSAUCEDO9
  • MEMBER
  • 1 POST
I got a 2000 Ford Excursion, the turn signals, emergency flashers and break (stop) lights don't work. Regulars lights do work front and back as well as the top break (stop) light. I checked all fuses and bulbs and they're in working conditions, none burnt out. What can be wrong?
Jan 23, 2010 at 8:14 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Using a test light, check the socket with a test light to see if there is power to them. Also, under the driver's side on the rear part of the frame, there is a plug. Make sure it is clean, tight, and not corroded.

Let me know what you find.

Joe
Mar 1, 2010 at 8:25 AM
Avatar
CASHWORTH
  • MEMBER
  • 4 POSTS
You need a multifuntion switch. It's the directional lever assembly. It conrols all the lighting, and is a frequent problem on every Ford. It's about $70 at any part store or your dealer.
Mar 20, 2010 at 5:51 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.